Log Storage
The Log Storage window displays the storage of service logs.
Checking Log Storage
This window is only displayed when there is a hard disk or SD card on the device.
Parameters on the Log Storage window are listed in the following table.
Parameter |
Description |
|---|---|
Service |
Type of the service log or report |
Usage |
Percentage of the specific service log or report for all the service logs and reports |
Maximum Storage Space |
Maximum storage space of the specific service log or report This parameter is displayed only when a hard disk or SD card is available. |
Days Remaining (Estimated) |
Number of days for which the remaining storage space can be used. 1000+ indicates that the remaining storage space can be used for no less than 1000 days. This parameter is displayed only when a hard disk or SD card is available. |
Setting Log Storage
This window is only displayed when there is a hard disk or SD card on the device.
- Click
and configure the parameters on the window of Configure Log System Service Storage as follows.
Parameter
Description
Set Disk Usage Alarm Threshold
Set the percentage of the disk usage alarm threshold.
Set Log Process Mode upon Full Disk Space
Set the log processing mode upon disk space insufficiency, and the processing modes include:
- Overwrite
- Discard
Specify Storage Space
Set the storage space percentage of each service log or report for all the service logs and reports.
If the storage space usage of any type of service log or report reaches or exceeds the Alarm Threshold of the disk space (for example, the storage space allocated to traffic logs is 1 GB; the configured alarm threshold is 80%; when the used space reaches 0.8 GB), the system generates the log NLOG/2/DISKFULL every day, so that the administrator deletes unnecessary logs to release space.
Customize Report and Map Display
You can customize display dimensions for each type of report. After selecting a customized dimension, you can view report data on this dimension tab in the Monitor window. If no dimension is customized, nothing is displayed on the tab.
Clearing Log Storage
This window is only displayed when there is a hard disk or SD card on the device.
Select the type of service log or report which need to be cleared, and click Clear.