Enabling the Information Center

The FW can output debugging information only after the information center is enabled.

Context

By default, the information center is enabled on the FW. If the information center is disabled, perform the following operations to enable the information center.

When the information center is enabled and the system is busy sorting and outputting information, system performance is affected.
Debugging degrades system performance. Therefore, after debugging, run the undo debugging all command to disable debugging immediately.

Procedure

Access the system view.
```
system-view
```
Enable the information center.
```
info-center enable
```
Optional: Name the information channel.
```
info-center channel channel-number name channel-name
```
Each information channel must have a unique name, and the channel names must represent the actual channel functions.

Optional: Configure a timestamp for debugging information.

info-center timestamp debugging { boot | { date | short-date | format-date } [ precision-time { second | tenth-second | millisecond } ] } [ without-timezone ]

The default debugging information timestamp format is date.

Optional: Set a period after which the debugging function is automatically disabled.
```
debugging timeout timeout
```
To immediately disable the debugging function, press the Ctrl+O hotkeys or run the undo debugging all command.