Checking the Configuration

After SNMPv1 functions are configured, you can view the SNMPv1 configurations.

The configurations of SNMPv1 functions are complete.

Run the display snmp-agent community command to check the configured community name.
Run the display snmp-agent sys-info version command to check the enabled SNMP version.
Run the display acl acl-number command to check the rules in the specified ACL.
Run the display snmp-agent mib-view command to check the MIB view.
Run the display snmp-agent sys-info contact command to check the equipment administrator's contact information.
Run the display snmp-agent sys-info location command to check the location of the device.
Run the display snmp-agent target-host command to view information about all destination hosts, such as the IP addresses.
Run the display snmp-agent trap all command to view whether the device is enabled to send alarms to the NMS.
Run the display snmp-agent statistics command to view the statistics of SNMP packets.
Run the display current-configuration | include max-size command to view the current snmp packet Maximum size.
Run the display current-configuration | include trap command to view configurations of the trap function.
Run the display snmp-agent extend error-code status command to check whether the extended error code function is enabled on the device.