agetime

Function

The agetime command sets the aging time of an NQA test.

The undo agetime command deletes the configured aging time and restores the default setting.

Format

agetime HH:MM:SS

undo agetime

Parameters

Parameter	Description	Value
HH:MM:SS	Specifies the aging time of an NQA test.	HH ranges from 0 to 23; MM ranges from 0 to 59; SS ranges from 0 to 59. By default, the aging time of an NQA test is 0, indicating that the test is not aged.

Views

NQA view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To prevent endless running of a test instance, you need to age the test instance periodically. The agetime command can be used to configure the aging time to change the survival time of a test instance in the system.

The aging time is started when the NQA test instance is in the inactive state. When the aging time expires, the system deletes the NQA test instance automatically.
The aging time is reset when the NQA test instance is in the active state.

Prerequisites

Before using the agetime command, run the test-type command to specify the type of a test instance.

Precautions

The aging time of a running test instance cannot be changed.

Example

# Set the aging time of the NQA test named admin http.

<sysname> system-view
[sysname] nqa test-instance admin http
[sysname-nqa-admin-http] test-type http
[sysname-nqa-admin-http] agetime 1:0:0