background

Function

The background command configures a background image of an authentication web page.

The undo background command deletes a background image of an authentication web page.

Format

background file-name

undo background

Parameters

Parameter	Description	Value
file-name	Specifies the name of a background image.	The value is a string of 6 to 32 characters. The background image must be a JPG, JPEG, BMP, PNG, or GIF file of no greater than 100 KB.

Views

Authentication web page customization view

Default Level

2: Configuration level

Usage Guidelines

The background image must be saved in the CF card of the device. If no path is specified, the background image is saved in the default directory. If a path is specified, the background image is saved at the specified path.

The default directory is hda1:/umdb/umsystem.

This command does not support hot standby. Therefore, in hot standby networking, you need to run the command on both the active and standby devices.

Run the hrp standby config enable command on the active device first. Otherwise, the command cannot be run on the standby device.

Example

# Configure background image pic.jpg for an authentication web page. The image is already saved in the root directory of the CF card.

<sysname> system-view
[sysname] page-setting
[sysname-page-setting] background pic.jpg