combo enable

Function

The combo enable command specifies the working mode of a combo interface.

combo enable { copper | fiber }

Parameter	Description	Value
copper	Indicates that the interface works as an electrical interface.	-
fiber	Indicates that the interface works as an optical interface.	-

Ethernet interface view

2: Configuration level

By default, the combo interface works as an electrical interface.

# Configure the combo interface to work as an optical interface.

<sysname> system-view
[sysname] interface GigabitEthernet 0/0/4
[sysname-GigabitEthernet0/0/4] combo enable fiber