command-privilege level rearrange
Function
The command-privilege level rearrange command promotes the commands of Level 2 or Level 3 to Level 10 or Level 15 in batches.
The undo command-privilege level rearrange command restores the commands whose levels are promoted to Level 10 or Level 15 in batches to Level 2 or Level 3.
Usage Guidelines
Before running the command-privilege level rearrange command, ensure that a level-15 privilege users on the device are able to manage the device after promoting the command level in batches. Otherwise, the device cannot operate properly after the command-privilege level rearrange command is run.
Ensure that your privilege level is 15 before running the command-privilege level rearrange command.
The command to be promoted cannot be the one modified by the command-privilege level command. The level of the command modified by the command-privilege level command remains unchanged.
The command level that can be restored must be the one that is promoted in batches.
Before running the command-privilege level rearrange command, confirm that the user level is 15. Otherwise, this command cannot be run.
After the command-privilege level rearrange command is run, users at Level 2 to Level 9 are not allowed to run commands defaulted to Level 2, and users at Level 3 to Level 14 are not allowed to run commands defaulted to Level 3. If some users are required to have the same command privilege as that before the command level promotion, you are advised to adjust the levels of all users on the device.
After the undo command-privilege level rearrange command is run, users at Level 3 to Level 14 are allowed to run commands defaulted to Level 3, and users at Level 2 to Level 9 are allowed to run commands defaulted to Level 2. If some users are required to have the same command privilege as that before the command level decrease, you are advised to adjust the levels of all users on the device.
After the command level is promoted in batches, the level of the command-privilege level rearrange command is adjusted to Level 15. Thus, the level of the user who runs this command should be 15.
The system prompts that the user command level is promoted in batches to avoid misoperation of other users.
Before the command level resumes after being promoted in batches, promoting the command level in batches again does not take effect.