dataflow cache-send speed

Function

The dataflow cache-send speed command sets the rate at which cached logs are sent.

The undo dataflow cache-send speed command restores the rate to the default value.

Format

dataflow cache-send speed value

undo dataflow cache-send speed

Parameters

Parameter	Description	Value
value	Specifies the rate at which cached logs are sent.	The value is an integer ranging from 1 to 10000, indicating the number of cached logs sent per second. The default value is 100.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Application Scenarios

If there are multiple FW devices send logs to a log server, you must set a rate limit for scheduled log sending. Otherwise, the log server may be too busy to receive all the logs. Setting a rate limit may cause log losses.

Restrictions

This function is supported only when the USG6510E/6510E-POE/6530E SD card is in use.

The sending rate of the USG6510E/6510E-POE/6530E cannot exceed 2000 logs per second.

Example

# Set the FW to send 100 cached logs per second.

<sysname> system-view
[sysname] dataflow cache-send speed 100