destination-address (NQA view)

Function

The destination-address command specifies the destination IP address of the NQA test packets.

The undo destination-address command deletes the configured destination IP address.

Format

destination-address ipv4 ip-address

destination-address url url-string

undo destination-address

Parameters

Parameter	Description	Value
ipv4 ip-address	Specifies a destination IPv4 address.	The value is in dotted decimal notation.
url url-string	Specifies a URL as the destination IP address.	The value is a string of 1 to 230 characters.

Views

NQA view

Default Level

2: Configuration level

Usage Guidelines

Prerequisites

Before running the datafill command, run the test-type command to specify the type of a test instance.

Precautions

You cannot change the destination IP address of the NQA test that is running.

The destination addresses can be URLs only for HTTP and DNS test instances.

Example

# Set the destination IP address of test admin icmp.

<sysname> system-view
[sysname] nqa test-instance admin icmp
[sysname-nqa-admin-icmp] test-type icmp
[sysname-nqa-admin-icmp] destination-address ipv4 10.1.1.1