destination-address (SACG interworking policy rule view)

Function

The destination-address command specifies a destination IP address in a SACG interworking policy rule.

The undo destination-address command deletes the destination IP address from a SACG interworking policy rule.

Format

destination-address { address-set address-set-name &<1-6> | ipv4-address { ipv4-mask-length | mask mask-address | wildcard } [ description description ] | range { ipv4-start-address ipv4-end-address } [ description description ] | all }

undo destination-address { address-set address-set-name &<1-6> | ipv4-address { ipv4-mask-length | mask mask-address| wildcard } [ description ] | range { ipv4-start-address ipv4-end-address } [ description ] | all }

Parameters

Parameter	Description	Value
address-set address-set-name &<1-6>	Specifies the name of an address or address group.	The value must be the name of an existing address or address group. You can add or delete a maximum of six addresses or address groups at a time.
ipv4-address	Specifies an IPv4 address.	The value is in dotted decimal notation.
ipv4-mask-length	Specifies the length of a mask for the IPv4 address.	The value is an integer ranging from 1 to 32.
mask mask-address	Specifies a mask for the IPv4 address.	The value is in dotted decimal notation. For example, 255.255.255.0 indicates that the subnet mask length is 24.
wildcard	Specifies a wildcard for the IPv4 address.	The value is in dotted decimal notation. The wildcard in binary format can be contiguous 1s, such as 0.255.0.255 (00000000 11111111 00000000 11111111). Only digits 0 in the binary format are matched, but not digits 1. For example, IP address 192.168.1.1/0.255.0.255 matches the IP addresses in 192..1. format.
description description	Specifies the description of an individual IPv4/IPv6 address or address segment.	The value is a string of 1 to 128 characters.
range	Indicates the address range.	-
ipv4-start-address	Specifies the start address of the IPv4 address range.	The value is in dotted decimal notation.
ipv4-end-address	Specifies the end address of the IPv4 address range.	The value is in dotted decimal notation.
any	Indicates any destination IP address.	-

Views

SACG interworking policy rule view

Default Level

2: Configuration level

Usage Guidelines

Regions and region groups are collections of IP addresses. They function like IP addresses or IP address groups. Packets matching any IP address in the specified region or region group match the specified region or region group.

Example

# Set the destination IP address in SACG interworking policy rule rule1.

<sysname> system-view
[sysname] rightm-policy
[sysname-policy-rightm] rule name rule1
[sysname-policy-rightm-rule-rule1] destination-address 10.1.1.1 mask 255.255.255.0