dialer-group

Function

The dialer-group command configures access control on the packets transmitted on an interface and includes the interface in a dialer access control group.

The undo dialer-group command removes the setting.

Format

dialer-group group-number

undo dialer-group

Parameters

Parameter	Description	Value
group-number	Specifies the sequence number of dialer access group. This group is set through the dialer-rule command.	The value ranges from 1 to 255.

Views

Dialer interface view

Default Level

2: Configuration level

Usage Guidelines

The dialer-group command includes a physical interface into an access control group.

You can run the dialer-rule command to associate an access control group with the acl command.

An interface can belong to only one access control group. If it is configured to be a member of another access control group, this configuration replaces the previous one.

Example

# Add dialer 1 to dialer-group 1.

<sysname> system-view
[sysname] dialer-rule 1 acl 3001
[sysname] interface dialer 1
[sysname-Dialer1] dialer-group 1