dialer number

Function

The dialer number command configures a dial number for placing a call to a single remote end.

The undo dialer number command deletes the configured dial number.

Format

dialer number dial-number [ autodial ]

undo dialer number dial-number

Parameters

Parameter	Description	Value
dial-number	Specifies the dial number for calling a remote end.	The value is a string of 1 to 30 characters.
autodial	Specifies the device automatically dials at a certain interval.	-

Views

Dialer interface view

Default Level

2: Configuration level

Usage Guidelines

Before configuring the dialer number command, run the dialer user command to enable Resource-Shared DCC or run the dialer enable-circular command to enable Circular DCC.

Example

# Set the dialer number for dialer0 calling the remote end to *99#.

<sysname> system-view
[sysname] interface Dialer 0
[sysname-Dialer0] dialer number *99#