dialer timer wait-carrier

Function

The dialer timer wait-carrier command configures the timeout time of a wait-carrier timer.

The undo dialer timer wait-carrier command restores the default timeout time.

Format

dialer timer wait-carrier seconds

undo dialer timer wait-carrier

Parameters

Parameter	Description	Value
seconds	Specifies the waiting time in seconds.	The value ranges from 10 to 65535 in seconds. The default value is 60 seconds.

Views

Dialer interface view

Default Level

2: Configuration level

Usage Guidelines

Before running the dialer timer wait-carrier command, run the dialer user command to enable Resource-Shared DCC or run the dialer enable-circular command to enable Circular DCC.

The wait-carrier timer begins to time after the DCC call is initiated. If the connection fails to be set up within the timeout time of this timer, the call is terminated.

Example

# Configure Dialer 0 to wait for the call setup in 50 seconds.

<sysname> system-view
[sysname] interface Dialer 0
[sysname-Dialer0] dialer timer wait-carrier 50