display configuration-occupied user

Function

The display configuration-occupied user command displays information about the user that locks the configuration set.

Format

display configuration-occupied user

Parameters

None

Views

All views

Default Level

2: Configuration level

Usage Guidelines

To view information about the user that locks the configuration set, run the display configuration-occupied user command. If the configuration set is not locked, a message is displayed to indicate that no user obtains exclusive configuration access.

Example

# Display the user that locks the configuration set.

<sysname> display configuration-occupied user
User Index: 34
User Session Name: VTY0
User Name:**
IP Address: 10.1.1.1
Locked Time: 22:31:36  11-11-2014
Last Configuration Time: 22:31:36  11-11-2014
The time out value of configuration right locked is: 30 second(s)

**Table 1** Description of the **display configuration-occupied user** command output
Item	Description
User Index	Index of a user.
User Session Name	Session name of a user, ranging from VTY0 to VTY14. snmp-agent: session name of an NMS user.
User Name	User name of logging. If a login user name is **, the user logs in to a device using a serial port or the password authentication mode. If the login user name is a community or V3 user name, the user is an NMS user.
IP Address	IP address of a user.
Locked Time	Time when the configuration set is locked.
Last Configuration Time	Time when the user runs the last command.
The time out value of configuration right locked is	Time when the configuration right is locked.

# Display the current user that locks the configuration set. The command output shows that no user locks the configuration set.

<sysname> display configuration-occupied user
Info: No user locked the current configuration.