display dialer

Function

The display dialer command displays information about DCC interfaces.

Format

display dialer [ interface interface-type interface-number ]

Parameters

Parameter	Description	Value
interface-type	Specifies the interface type. This parameter is case-insensitive.	-
interface-number	Specifies the interface number. This parameter is case-insensitive.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display dialer interface command to view the interface status and statistics. You can use the command output to monitor traffic and diagnose faults.

Example

# Display information about Dialer 1 of a DCC interface.

<sysname> display dialer interface dialer 1
Dial Interface: Dialer1
   Dialer route:
     NextHop_address           Dialer_Number
002
   Dialer timers (secs):
     Auto-dial: 300      Compete: 20       Enable: 20
     Idle: 120           Wait-for-Carrier: 60

**Table 1** Description of the **display dialer** command output
Item	Description
NextHop_address	Next hop address of dialer route.
Dialer_Number	Dialer number of the dialer route.
Auto-dial	Interval for automatic dialup, which is set by the dialer timer autodial command.
Compete	Time configured using the dialer timer compete command.
Enable	Time configured using the dialer timer enable command.
Idle	Time configured using the dialer timer idle command.
Wait-for-Carrier	Time configured using the dialer timer wait-carrier command.