The display firewall emergency bypass command displays the status of the emergency forwarding function.
# Display the status of the emergency forwarding function.
<sysname> display firewall emergency bypass
2018-04-11 11:01:19.080 +09:00 DST
=====================================================================
Emergency Bypass Information
=====================================================================
Master switch: ON
Total timeout: 300(s)
Remaining time: 0(s)
Time to warning: 0(s)
---------------------------------------------------------------------
Function Switch Status BypassCount
Blacklist OFF INIT 0
User management ON BYPASS 2
Security policy OFF INIT 0
Bandwidth management OFF INIT 0
IKE certificate time validation OFF INIT --
Intelligent awareness engine(IAE) OFF INIT 0
License(1320min remain today) OFF INIT --
Source tracing & Top IP address log OFF INIT 0
HRP mirror session ON ENABLE 2
=====================================================================
Item |
Description |
|---|---|
Master switch |
State of the emergency forwarding function |
Total timeout |
Lifetime of the emergency forwarding function |
Remaining time |
Remaining time of the emergency forwarding function |
Time to warning |
Time when the system generates an alarm to remind the user that the function will be soon disabled |
Function |
Name of each function item of the emergency forwarding function NOTE:
Models except the USG6510E/6510E-POE and USG6530E support HRP mirror session. |
Switch |
Indication of whether the emergency forwarding function is enabled.
|
Status |
Working status of the emergency forwarding function for an object
|
BypassCount |
Number of times the emergency forwarding function is invoked. This counter indicates whether the emergency forwarding function takes effect. |