The display flow-suppression command displays traffic suppression configure information on an interface.
# Display traffic suppression information on the GigabitEthernet 0/0/1 interface.
<sysname> system-view [sysname] interface GigabitEthernet 0/0/1 [sysname-GigabitEthernet0/0/1]display flow-suppression storm type rate mode set rate value --------------------------------------------------------- broadcast percent 20 multicast percent 100
Item |
Description |
|---|---|
storm type |
Type of traffic to be suppressed, which can be multicast or broadcast traffic |
rate mode |
Traffic suppression mode:
|
set rate value |
Threshold, which can be set using the following commands:
|