display haca-server configuration

Function

The display haca-server configuration command displays the configuration of the HACA server template.

Format

display haca-server configuration

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After a HACA server template is configured or during HACA troubleshooting, you can run the display haca-server configuration command to check whether the HACA server template is correctly configured.

Example

# Display the configuration of the HACA server template.

<sysname> display haca-server configuration
  ---------------------------------------------------------------------------
  HACA-server template name                  : te                            
  HACA-server server-ip-address(port)        : 1.1.1.1(3335)                 
  HACA-server pki-realm-name                 : default                       
  HACA-server Status                         : IDLE                          
  HACA-server source-ip-address              : -                             
  HACA-server down-delay-interval(sec)       : 30                            
  HACA-server response-timeout-interval(sec) : 5                             
  HACA-server domain-included                : ORIGINAL                      
  HACA-server heart-beat-interval(min)       : 5                             
  HACA-server reconnection-interval(min)     : 1                             
  HACA-server user-syn-interval(min)         : 10                            
  HACA-server server-escape-state            : 2                             
  ---------------------------------------------------------------------------
  Total 1,1 printed

**Table 1** Description of the **display haca-server configuration** command output
Item	Description
HACA-server template name	Name of the HACA server template.
HACA-server server-ip-address(port)	IP address and port of the HACA server.
HACA-server pki-realm-name	PKI domain name of the HACA server.
HACA-server Status	Status of the HACA server. The value can be: IDLE: indicates the idle state. INIT: indicates the initial state. UP: indicates the up state. REGISTE: indicates the registration state. DOWN: indicates the down state.
HACA-server source-ip-address	Source IP address of HACA packets.
HACA-server down-delay-interval(sec)	HACA interruption hold-off period, in seconds.
HACA-server response-timeout-interval(sec)	HACA packet response timeout period, in seconds.
HACA-server domain-included	HACA user name format (whether a user name contains a domain name): YES: indicates that a user name contains a domain name. NO: indicates that a user name does not contain a domain name. ORIGINAL: indicates that the device directly uses original user names without any changes.
HACA-server heart-beat-interval(min)	HACA heartbeat packet sending interval, in minutes.
HACA-server reconnection-interval(min)	HACA server reconnection interval, in minutes.
HACA-server user-syn-interval(min)	HACA user information synchronization interval, in minutes
HACA-server server-escape-state	HACA escape state: 0: indicates that the server is up and escape is disabled. 1: indicates that the server is down and escape is enabled. 2: indicates the initial state (escape is disabled).