display interface healthcheck

Function

The display interface healthcheck command displays information about health check applied to an interface.

Format

display interface [ interface-type interface-number | interface-name ] healthcheck

Parameters

Parameter	Description	Value
interface-type interface-number	Specifies the interface type and number.	-
interface-name	Specifies the interface name.	-

Views

All views

Default Level

2: Configuration level

Usage Guidelines

None

Example

# Display information about health check applied to GigabitEthernet0/0/5.

<sysname> display interface GigabitEthernet0/0/5 healthcheck
 --------------------------------------------------------------------------------
                                                                                 
 Interface                                Name                            Status 
 --------------------------------------------------------------------------------
                                                                                 
 GigabitEthernet0/0/5                     hchk1                           down   
                                                                                 
 --------------------------------------------------------------------------------

**Table 1** Description of the **display interface GigabitEthernet0/0/5 healthcheck** command output
Item	Description
interface	Interface where health check is applied
Name	Health check name
Status	Health check result up: The probe succeeds. Down: The probe fails. init: No probe is initiated.