display snmp-agent trap feature-name config-change all

Function

The display snmp-agent trap feature-name config-change all command displays the default status and current status of configuration change alarms.

Format

display snmp-agent trap feature-name config-change all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To change the alarm status (enable or disable the alarm function), run the snmp-agent trap enable feature-name config-change command.

Example

# Display the default status and current status of configuration change alarms.

<sysname> display snmp-agent trap feature-name config-change all
------------------------------------------------------------------------------  
Feature name: config-change                                                     
Trap number : 1                                                                 
------------------------------------------------------------------------------  
Trap name                       Default switch status   Current switch status   
hwSecurityConfigChangeNotify    off                     on

**Table 1** Description of the **display snmp-agent trap feature-name config-change all** command output
Item	Description
Feature name	Name of the module for which an alarm was generated
Trap number	Number of alarms
Trap name	Alarm name hwSecurityConfigChangeNotify: indicates the configuration change alarm.
Default switch status	Default status of the configuration change alarm. off: indicates that the alarm function is disabled by default.
Current switch status	Current status of the configuration change alarm. on: indicates that the alarm function is enabled. off: indicates that the alarm function is disabled.