The display traffic-analysis configuration command displays detailed intelligent traffic analysis configurations.
A device can further process and visualize flow information only after intelligent traffic analysis for UDP flows is enabled on the device and the intelligent traffic analysis table of UDP flows is exported to the specified TDA. To view all the configurations of intelligent traffic analysis configurations on the device, run the display traffic-analysis configuration command.
# Check detailed information about intelligent traffic analysis results of UDP flows.
<sysname> display traffic-analysis configuration
========================================================================
Traffic Analysis Configuration
========================================================================
ACL number: 3055 Block number: 256
Flow inactive time(s): 120 Template export interval(min): 15
------------------------------------------------------------------------
Source IP Address : 10.3.1.1
Destination IP Address : 10.3.1.10
Source IPv6 Address :
Destination IPv6 Address:
Destination VPN : public
Port number : 6000
------------------------------------------------------------------------
Item |
Description |
|---|---|
ACL number |
Configured ACL. |
Block number |
Block granularity of UDP flows to be analyzed. |
Flow inactive time(s) |
Inactive flow aging time, in seconds. |
Template export interval(min) |
Interval at which a template is delivered, in minutes. |
Source IP Address |
Source IP address of exported packets. |
Destination IP Address |
Destination IP address of exported packets. |
Destination VPN |
Destination VPN instance name of exported packets. |
Port Number |
Destination port number of exported packets. |