display voltage

Function

The display voltage command displays the status of the voltage sensor in the specified slot.

Format

display voltage [ all | slot slot-id ]

Parameters

Parameter	Description	Value
slot-id	Specifies the slot ID of the voltage sensor that is in position.	-
all	Specifies all slot IDs of the voltage sensor that is in position.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

In routine maintenance, you can run this command to check the device voltage.

This command depends on the hardware. If this command cannot be executed or no command output is displayed on a device, the device does not support this command.

Example

# Display the configuration and status of the voltage sensor of USG6000E in slot 2.

[sysname] display voltage slot 0                                                 
------------------------------------------------------------------------------- 
 Slot  Card  Sensor SensorName       Status  Current(V)  Lower(V)    Upper(V)   
------------------------------------------------------------------------------- 
 0     -     0      1.1V_CORE        Normal  1.1000      1.0400      1.1500     
       -     1      3.3V             Normal  3.3000      3.1200      3.4500     
       -     2      2.5V             Normal  2.5200      2.3700      2.6100     
       -     3      1.5V             Normal  1.4900      1.4200      1.5700     
       -     4      1.1V             Normal  1.0900      1.0400      1.1500     
       -     5      0.75V_DDR        Normal  0.7400      0.7100      0.7800     
       -     6      12V              Normal  11.8800     11.4000     12.6000

Item	Description
Slot	Slot ID of the sensor.
Card	Subcard of the voltage sensor.
Sensor	ID of the voltage sensor.
SensorName	Name of the voltage sensor.
Status	Status of the voltage sensor.
Current(V)	Current voltage.
Lower(V)	Minimum value of the normal voltage.
Upper(V)	Maximum value of the normal voltage.