egress-interface (NAT policy rule view)

Function

The egress-interface command specifies an outbound interface in a NAT policy rule.

The undo egress-interface command deletes an outbound d interface specified in a NAT policy rule.

Format

egress-interface interface-type interface-number

undo egress-interface { interface-type interface-number | all }

Parameters

Parameter	Description	Value
interface-type interface-number	Specifies the type and number of an interface.	-
all	Indicates all the interface.	-

Views

NAT policy rule view

Default Level

2: Configuration level

Usage Guidelines

Either a destination security zone or an outbound interface can be specified in a NAT policy rule. If both a destination security zone and an outbound interface are configured for a NAT policy rule, the latest configuration overrides the previous one.

By default, the outbound interface in a NAT policy rule is set to any, and multiple outbound interfaces can be configured.

Example

# Configure GigabitEthernet 0/0/2 as an outbound interface in a NAT policy rule named abc.

<sysname> system-view
[sysname] nat-policy 
[sysname-policy-nat] rule name abc 
[sysname-policy-nat-rule-abc] egress-interface GigabitEthernet 0/0/2