egress-interface (traffic policy rule view)

Function

The egress-interface command specifies an outbound interface in a traffic policy rule.

The undo egress-interface command deletes an outbound interface from a traffic policy rule.

Format

egress-interface interface-type interface-number

undo egress-interface { interface-type interface-number | all }

Parameters

Parameter	Description	Value
interface-type interface-number	Specifies the type and number of an interface.	-
all	Specifies all the outbound interface.	-

Views

Traffic policy rule view

Default Level

2: Configuration level

Usage Guidelines

An outbound interface can be an Ethernet interface or its subinterface, Eth-Trunk or its subinterface, tunnel interface, Virtual-if interface or VLANIF interface.

Example

# Configure GigabitEthernet 0/0/2 as an outbound interface in traffic policy rule traffic_rule.

<sysname> system-view
[sysname] traffic-policy
[sysname-policy-traffic] rule name traffic_rule
[sysname-policy-traffic-rule-traffic_rule] egress-interface GigabitEthernet 0/0/2