firewall dynamic-resource used-up alarm blacklist threshold

Function

The firewall dynamic-resource used-up alarm blacklist threshold command sets an alarm threshold for the usage of blacklist entries.

The undo firewall dynamic-resource used-up alarm blacklist threshold command restores the default value.

Format

firewall dynamic-resource used-up alarm blacklist threshold threshold

undo firewall dynamic-resource used-up alarm blacklist threshold

Parameters

Parameter	Description	Value
threshold	Specifies the alarm threshold for the usage of blacklist entries.	The value is an integer ranging from 1% to 100%. The default value is 80%.

Views

System view

Default Level

3: Management level

Usage Guidelines

The default alarm threshold is 80%. Before setting an alarm threshold for the usage of blacklist entries, run the firewall dynamic-resource used-up alarm blacklist enable or firewall dynamic-resource used-up alarm all enable command to enable the function of sending logs and alarms when the usage of blacklist entries reaches the threshold. Otherwise, no log or alarm is sent when the usage of blacklist entries reaches the threshold.

When the usage of blacklist entries reaches the alarm threshold, log FWD/4/RES_OVER and alarm FWD_1.3.6.1.4.1.2011.6.122.15.3.4.5 hwSecStatBLSTrapOverThreshold are sent. When the usage of blacklist entries falls below 95% of the alarm threshold, log FWD/4/RES_BELOW and alarm FWD_1.3.6.1.4.1.2011.6.122.15.3.4.6 hwSecStatBLSTrapBelowThreshold are sent.

Example

# Set an alarm threshold for the usage of blacklist entries to 85%.

<sysname> system-view
[sysname] firewall dynamic-resource used-up alarm blacklist enable
[sysname] firewall dynamic-resource used-up alarm blacklist threshold 85