firewall dynamic-resource used-up alarm sslvpn-user threshold

Function

The firewall dynamic-resource used-up alarm sslvpn-user threshold command sets an alarm threshold for the SSL VPN concurrent user usage of a virtual gateway.

The undo firewall dynamic-resource used-up alarm sslvpn-user threshold command restores the default alarm threshold for the SSL VPN concurrent user usage of a virtual gateway.

Format

firewall dynamic-resource used-up alarm sslvpn-user threshold threshold

undo firewall dynamic-resource used-up alarm sslvpn-user threshold

Parameters

Parameter	Description	Value
threshold	Specifies an alarm threshold for the SSL VPN concurrent user usage of a virtual gateway.	The value is an integer ranging from 1 to 100, in percentage. The default value is 80.

Views

System view

Default Level

3: Management level

Usage Guidelines

The alarm threshold applies to every virtual gateway.

Before setting an alarm threshold, run the firewall dynamic-resource used-up alarm sslvpn-user enable or firewall dynamic-resource used-up alarm all enable command to enable the function of sending an alarm after the SSL VPN concurrent user usage of a virtual gateway reaches the threshold. If the alarm function is disabled, the device will not send alarms even if an alarm threshold is set.

After the SSL VPN concurrent user usage of a virtual gateway reaches the alarm threshold, the device sends the alarm USER_1.3.6.1.4.1.2011.6.122.44.1.2.5 hwSecSslvpnUserOverThreshold. After the SSL VPN concurrent user usage falls below 95% of the alarm threshold, the device sends the alarm USER_1.3.6.1.4.1.2011.6.122.44.1.2.6 hwSecSslvpnUserBelowThreshold.

Example

# Set the alarm threshold to 85% for the SSL VPN concurrent user usage of a virtual gateway.

<sysname> system-view
[sysname] firewall dynamic-resource used-up alarm sslvpn-user enable
[sysname] firewall dynamic-resource used-up alarm sslvpn-user threshold 85