firewall ipsec load-balance enable

Function

The firewall ipsec load-balance enable command enables the load balancing function for ESP packets.

The undo firewall ipsec load-balance enable command disables the load balancing function for ESP packets.

Format

firewall ipsec load-balance enable

undo firewall ipsec load-balance enable

Parameters

None

Views

System view

Level

2: Configuration level

Usage Guidelines

By default, the load balancing function for ESP packets is disabled.

After the firewall reverse-route load-balance enable command is run, if the firewall ipsec load-balance enable command is not run, hash is performed on ESP packets based only on destination IP addresses, which may result in load unbalancing. After the firewall ipsec load-balance enable command is run, hash can be performed on ESP packets based on source and destination IP addresses, achieving load balancing.

Example

# Enable the load balancing function for ESP packets.

<sysname> system-view
[sysname] firewall reverse-route load-balance enable
[sysname] firewall ipsec load-balance enable