info-center rate-limit monitor-period

Function

The info-center rate-limit monitor-period command sets the monitoring period for the information center to suppress the log processing rate.

The undo info-center rate-limit monitor-period command restores the default value.

Format

info-center rate-limit monitor-period value

undo info-center rate-limit monitor-period

Parameters

Parameter	Description	Value
value	Specifies the monitoring period for the information center to suppress the log processing rate. The value is an integer that ranges from 1 to 60. By default, the value is 3 in seconds.	The value is an integer ranging from 1 to 60, in seconds. The default value is 3.

Views

System view

Default Level

3: Management level

Usage Guidelines

The info-center rate-limit monitor-period command can be used to set a monitoring period for the information center to limit the log processing rate.

In the monitoring period specified by value, if the rate of sending a single log every second exceeds info-center rate-limit threshold, the information center will limit the log processing rate.
Then, in the monitoring period which is five times value, if the number of a single type of logs that are sent every second is smaller than info-center rate-limit threshold, the information center will no longer limit the log processing rate.

By default, the monitoring period is 3 seconds.

Example

# Set the monitoring period for the information center to suppress the log processing rate to 5 seconds.

<sysname> system-view
[sysname] info-center rate-limit monitor-period 5