The info-center enable command enables the information center.
The info-center disable command disables the information center.
The undo info-center enable command disables the information center.
info-center enable
undo info-center enable
info-center disable
None
System view
3: Management level
By default, the information center is enabled.
The system outputs the information to the log host and the console after the information center is started up.
After the information center is disabled, only logfile and logbuffer record logs, the other channel no longer records.
# Enable the information center.
<sysname> system-view [sysname] info-center enable Info: Information center is enabled.