info-center snmp channel

Function

The info-center snmp channel command sets outputting the information to the SNMP agent through a specified channel.

The undo info-center snmp channel command restores the default configuration.

info-center snmp channel { channel-number | channel-name }

undo info-center snmp channel

Parameter	Description	Value
channel-number	Specifies the channel number.	In the range of 0 to 9, that is, there are 10 channels in the system.
channel-name	Specifies a channel name.	The name is a string of 1 to 30 case-insensitive characters, spaces not supported.

System view

3: Management level

By default, information is output to the SNMP agent through channel 5.

This command takes effect only after the information center is enabled.

# Set outputting the information to the SNMP agent through a specified channel.

<sysname> system-view
[sysname] info-center snmp channel 6