ip-link check enable

Function

The ip-link check enable command enables the IP-link function.

The undo ip-link check enable command disables the IP-link function.

Format

ip-link check enable

undo ip-link check enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

By default, the IP-link function is disabled.

If the ip-link check enable command is not run, the configuration commands related to the IP-link function, such as the ip-link name, can be run but do not take effect. In this case, the IP-link state in the display ip-link command output is always init.

Example

# Enable the IP-link function.

<sysname> system-view
[sysname] ip-link check enable