kpi log enable

Function

The kpi log enable command enables the function of recording KPI logs.

The undo kpi log enable command disables the function of recording KPI logs.

Format

kpi log enable

undo kpi log enable

Parameters

None

Views

System view

Default Level

3: Management level

Usage Guidelines

Only the USG6510E/6510E-POE/6530E does not support this command.

By default, KPI logs are recorded(USG6510E/6510E-POE/6530E not support the function of recording KPI logs).

After this function is enabled, the system records KPI logs, including cpu.log, ic.log, and interface.log. After these log files are recorded, you can export them in Monitor > Diagnosis Center > Diagnosis Information.

If you do not want the system to record such files, run the undo kpi log enable command. However, the cpu.log, ic.log, and interface.log files may also be exported on the web page. This is because some data has been generated before the function of recording KPI logs is disabled.

Example

# Enable the function of recording KPI logs.

<sysname> system-view
[sysname] kpi log enable
The KPI log function is enabled successfully