< Home

lldp check-change-interval

Function

The lldp check-change-interval command enables the polling function and sets the polling interval. By default, the polling function is disabled.

The undo lldp check-change-interval command disables the polling function.

Format

lldp check-change-interval interval

undo lldp check-change-interval

Parameters

Parameter Description Value
interval Specifies the polling interval. The value ranges from 2 to 10, in seconds.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

During polling, if certain configurations change, LLDP packets are sent to notify other devices of the changes.

Example

# Enable the polling function and set the polling interval to 5 seconds.

<sysname> system-view
[sysname] lldp check-change-interval 5
Parent Topic: LLDP Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >