logo

Function

The logo command configures a logo image of an authentication web page.

The undo logo command deletes a logo image of an authentication web page.

Format

logo file-name

undo logo

Parameters

Parameter	Description	Value
file-name	Specifies the name of a logo image.	The value is a string of 6 to 32 characters. The logo image must be a JPG, JPEG, BMP, PNG, or GIF file of no greater than 32 KB and with the recommended resolution of 150 px x 50 px.

Views

Authentication web page customization view

Default Level

2: Configuration level

Usage Guidelines

The logo image must be saved in the CF card of the device. If no path is specified, the logo image is saved in the default directory. If a path is specified, the logo image is saved at the specified path.

The default directory is hda1:/umdb/umsystem.

This command does not support hot standby. Therefore, in hot standby networking, you need to run the command on both the active and standby devices.

Run the hrp standby config enable command on the active device first. Otherwise, the command cannot be run on the standby device.

Example

# Configure a logo image for an authentication web page.

<sysname> system-view
[sysname] page-setting
[sysname-page-setting] logo pic.jpg