max active-linknumber

Function

The max active-linknumber command sets the maximum threshold of the member interfaces in Up state of the Eth-Trunk interface.

The undo max active-linknumber command restores the default.

Format

max active-linknumber link-number

undo max active-linknumber

Parameters

Parameter	Description	Value
link-number	Indicates the maximum threshold of the links in Up state. The maximum threshold must be larger than the minimum one.	The value is an integer ranging from 1 to 8.

Views

Eth-Trunk interface view, Layer-2 Eth-Trunk interface view

Default Level

2: Configuration level

Usage Guidelines

The default maximum threshold is 8.

The maximum threshold can be set only in static LACP mode.

When the number of member interfaces in Up state exceeds the maximum threshold, the rest interfaces function as backups. Otherwise, there is no backup interface.

Example

# Set the maximum threshold to 6.

<sysname> system-view
[sysname] interface eth-trunk 1
[sysname-Eth-Trunk1] max active-linknumber 6