min-tx-interval

Function

The min-tx-interval command sets the interval for sending BFD control packets.

The undo min-tx-interval command uses the default interval.

Format

min-tx-interval interval

undo min-tx-interval

Parameters

Parameter	Description	Value
interval	Specifies the interval for sending BFD control packets.	The value is an integer ranging from 100 to 1000, in milliseconds. The default value is 1000.

Views

BFD session view

Default Level

2: Configuration level

Usage Guidelines

To efficiently use system resources, when detecting that the BFD session goes Down, the system automatically adjusts the interval for sending BFD control packets to be a value of 2000 ms - 3000 ms or 10000 ms - 15000 ms according to specific products. When the BFD session goes Up, the set interval is restored.

For the minimum interval, refer to the prompt on the specific product.

Example

# Set the interval for sending BFD control packets to 500 milliseconds.

<sysname> system-view
[sysname] bfd pos0
[sysname-bfd-session-pos0] min-tx-interval 500