mode (DNS transparent proxy policy view)

Function

The mode command configures the routing mode for DNS transparent proxy.

The undo mode command restores the routing mode for DNS transparent proxy to the default setting.

mode { priority-of-userdefine | proportion-of-bandwidth | proportion-of-weight | based-on-multi-interface }

undo mode

Parameter	Description	Value
priority-of-userdefine	Indicates active/standby backup by user-defined link priority.	-
proportion-of-bandwidth	Indicates load balancing by link bandwidth.	-
proportion-of-weight	Indicates load balancing by link weight.	-
based-on-multi-interface	Indicates the global route selection mode.	-

DNS transparent proxy policy view

2: Configuration level

The default routing mode of DNS transparent proxy is the global route selection mode.

The routing mode configured for DNS transparent proxy has a higher priority than policy-based routing and global route selection.

If parameter based-on-multi-interface is selected,

Policy-based routing has a higher priority than global route selection.
The routing is based on the intelligent uplink selection member interfaces configured by running the add (intelligent uplink selection) command in the global multi-egress view, regardless of whether any equal-cost routes exist.

# Set the routing mode of DNS transparent proxy to the global route selection mode.

<sysname> system-view
[sysname] dns-transparent-policy
[sysname-policy-dns] mode based-on-multi-interface