nat64 security-policy enable

Function

The nat64 security-policy enable command enables NAT64 packets to be controlled by security policies.

The undo nat64 security-policy enable command disables NAT64 packets from being controlled by security policies.

By default, NAT64 packets are not controlled by security policies.

nat64 security-policy enable

undo nat64 security-policy enable

None

System view

2: Configuration level

This command is supported in V600R007C20SPC500 and later versions.

When static NAT64 is used to implement IPv4 access to IPv6 hosts, you need to enable this function so that packets can pass security policy check.

# Enables NAT64-translated packets to be controlled by security policies.

<sysname> system-view
[sysname] nat64 security-policy enable