nat address-group

Function

The nat address-group command configures an address pool.

The undo nat address-group command deletes an address pool.

nat address-group group-name [group-number]

undo nat address-group group-name

Parameter	Description	Value
group-name	Specifies the name of the address pool.	It is a string of 1 to 34 case-sensitive characters, and cannot be all, vsys, and all-systems. The length of a name without spaces ranges from 1 to 32 characters. The length of a name with spaces ranges from 3 to 34 characters. If a name contains spaces, the name must be enclosed with quotation marks (for example, "group for test"). The name cannot contain any question marks (?) and can contain digits only.
group-number	Specifies the number of the address pool.	USG6510E/6510E-POE: The value is an integer ranging from 0 to 31. USG6530E: The value is an integer ranging from 0 to 127. USG6515E/6550E/6560E/6580E: The value is an integer ranging from 0 to 511. USG6525E/6555E/6565E/6575E-B/6585E/6605E-B: The value is an integer ranging from 0 to 511. USG6610E/6620E: The value is an integer ranging from 0 to 2499. USG6615E/6625E: The value is an integer ranging from 0 to 2499. USG6630E/6650E: The value is an integer ranging from 0 to 2499. USG6635E/6655E: The value is an integer ranging from 0 to 2499. USG6680E: The value is an integer ranging from 0 to 2499. USG6712E/6716E: The value is an integer ranging from 0 to 4999.

System view

2: Configuration level

By default, the address pool is not configured.

When an address pool is performing address translation, it cannot be deleted.

# Configure the address pool nataddr whose address pool number is 1.

<sysname> system-view
[sysname] nat address-group nataddr 1
[sysname-address-group-nataddr]