nat port-block syslog enable

Function

The nat port-block syslog enable command configures the syslog service for the port range.

The undo nat port-block syslog enable command disables the syslog service for the port range.

Format

nat port-block { assigning | freeing } syslog enable

undo nat port-block { assigning | freeing } syslog enable

Parameters

Parameter	Description	Value
assigning	Enables the syslog service upon port range allocation.	-
freeing	Enables the syslog service upon port release.	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Configure the syslog service so that syslogs can be sent upon port range allocation and release. You are advised to use a service interface instead of a management interface to send syslogs.

By default, the syslog service upon port range allocation is disabled.

Example

# Enable the syslog service upon port range allocation.

<sysname> system-view
[sysname] nat port-block assigning syslog enable