nat user-table used-up alarm enable

Function

The nat user-table used-up alarm enable command enables the function of sending logs and alarms when the user table usage reaches the threshold.

The undo nat user-table used-up alarm enable command disables the function of sending logs and alarms when the user table usage reaches the threshold.

Format

nat user-table used-up alarm enable

undo nat user-table used-up alarm enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

By default, the function of sending logs and alarms when the number of user tables reaches the threshold is enabled. In addition, you can run the nat user-table used-up alarm threshold command to set the threshold.

If the user table usage reaches the alarm threshold, the system sends the USERTBL/4/USERTBL_USEDUP log and the USERTBL_1.3.6.1.4.1.2011.6.122.18.7.2.1 hwNatTrapUserTableUsedUp alarm. After the user table usage falls below the alarm threshold, the system sends the USERTBL/5/USERTBL_NORMAL log and USERTBL_1.3.6.1.4.1.2011.6.122.18.7.2.2 hwNatTrapUserTableNormal alarm.

Example

# Enable the function of sending logs and alarms when the user table usage reaches the threshold.

<sysname> system-view
[sysname] nat user-table used-up alarm enable