network-extension point-to-point enable

Function

The network-extension point-to-point enable command enables the point-to-point communication function of network extension.

The undo network-extension point-to-point enable command disables the point-to-point communication function of network extension.

Format

network-extension point-to-point enable

undo network-extension point-to-point enable

Parameters

None

Views

Function service view

Default Level

2: Configuration level

Usage Guidelines

When the functions of the network extension and point-to-point communication of the network extension are enabled, users in the same virtual network gateway can intercommunicate with each other like those in a LAN.

When enabling P2P communications, if the manual routing mode is adopted, you need to configure the virtual IP address pool to belong to the IP network segment in manual mode.

By default, the point-to-point communication function of network extension is disabled.

Example

# Enable the point-to-point function of network extension.

<sysname> system-view
[sysname] v-gateway gateway
[sysname-gateway] service
[sysname-gateway-service] network-extension point-to-point enable
  When enabling P2P communication, if the manual routing mode is adopted,       
  you need to configure the virtual IP address pool to belong to the IP         
  network segment in manual mode.