no-plug-in traffic

Function

The no-plug-in traffic command sets the IP address and port of the AD server monitored by the FW when AD SSO works in monitoring AD authentication packets mode.

The undo no-plug-in traffic command cancels the setting.

Format

no-plug-in traffic server-ip ipv4-address port port-number

undo no-plug-in traffic server-ip ipv4-address port port-number

Parameters

Parameter	Description	Value
server-ip ipv4-address	Specifies the IP address of the AD server.	The value is in dotted decimal notation.
port port-number	Specifies the port number of the AD server.	The value is an integer ranging from 1 to 65535. The port must be the one used by the AD server. Usually, an AD server uses UDP port 88 to send AD authentication results.

Views

AD SSO view

Default Level

2: Configuration level

Usage Guidelines

The FW can monitor a maximum of 32 AD servers.

Example

# Set the IP address to 10.1.1.1 and port number to 88 of the AD server monitored by the FW when AD SSO works in monitoring AD authentication packets mode.

<sysname> system-view
[sysname] user-manage single-sign-on ad
[sysname-sso-ad] no-plug-in traffic server-ip 10.1.1.1 port 88