poe max-port-power

Function

The poe max-port-power command sets the maximum output power of PoE power supply on an interface.

The undo poe max-port-power command restores the default maximum output power of PoE power supply on an interface.

Format

poe max-port-power max-power-value

undo poe max-port-power

Parameters

Parameter	Description	Value
max-power-value	Specifies the maximum output power of PoE power supply on an interface.	The value is an integer ranging from 0 to 30000, in mW. The default value is 30000.

Views

GE interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

For some non-standard and unclassified PDs, the power negotiation results may be different from the actual power required by the PDs. Setting the maximum output power of an interface protects the PD from overload and saves power.

Pre-Configuration Task

Run the poe enable command to enable PoE.

Understand the power of the PD connected to the interface.

Example

# Set the maximum output power of GE0/0/2 to 15000 mW.

<sysname> system-view
[sysname] interface GigabitEthernet 0/0/2
[sysname-GigabitEthernet0/0/2] poe max-port-power 15000