real-server-ip

Function

The real-server-ip command sets an original server address before smart DNS mapping.

The undo real-server-ip command deletes the original server address.

real-server-ip ip-address

undo real-server-ip

Parameter	Description	Value
ip-address	Specifies the original server address before smart DNS mapping.	The value is in dotted decimal notation. The value is the address of the Web server on an internet.

Smart DNS group view

2: Configuration level

This command needs to be executed in a single-server smart DNS scenario.

Single-server smart DNS must work with the NAT server function.

# Set the original server address before smart DNS mapping to 10.1.1.10.

<sysname> system-view
[sysname] dns-smart group 1 type single
[sysname-dns-smart-group-1] real-server-ip 10.1.1.10