service (SSL-encrypted traffic detection policy rule view)

Function

The service command configures a service for an SSL-encrypted traffic detection policy rule.

The undo service command deletes a service for an SSL-encrypted traffic detection policy rule.

Format

service { service-name &<1–6> | any }

undo service { service-name &<1–6> | all }

Parameters

Parameter	Description	Value
service-name &<1–6>	Indicates the name of a service or service group.	The service or service group must exist. Up to six services or service groups can be configured or deleted for the SSL-encrypted traffic detection policy rule.
any	Indicates any service or service group.	-
all	Indicates that all services corresponding to the SSL-encrypted traffic detection policy rule are deleted.	-

Views

SSL-encrypted traffic detection policy rule view

Default Level

2: Configuration level

Usage Guidelines

Services or service groups referenced by SSL-encrypted traffic detection policies can be user-defined services or service groups or predefined services. The ip service-set command configures user-defined services or service groups. The display predefined-service command displays predefined services.

SSL-encrypted traffic detection policies cannot reference predefined services of dynamic ports, that is, predefined services with port identifier dynamic port.

Example

# Set the service of SSL-encrypted traffic detection policy rule policy_sec to h323.

<sysname> system-view
[sysname] decryption-policy
[sysname-policy-decryption] rule name policy_sec
[sysname-policy-decryption-rule-policy_sec] service h323