The smart-nopat command specifies an IP address for NAPT.
The undo smart-nopat command cancels the configuration.
smart-nopat ip-address
undo smart-nopat ip-address
Specify an IP address for NAPT.
Address pool view
2: Configuration level
The ip address for NAPT cannot be the one in address pool.
By default, the IP address for NAPT is not configured.
# Configure the IP address 1.1.1.1 for NAPT.
<sysname> system-view [sysname] nat address-group nataddr 1 [sysname-address-group-nataddr] smart-nopat 1.1.1.1