sync-rate

Function

The sync-rate command sets the rate for the FW to send query packets to query online users from a Agile Controller server.

The undo sync-rate command restores the default rate (200 times per second).

Format

sync-rate rate

undo sync-rate

Parameters

Parameter	Description	Value
rate	Specifies the rate for sending query packets.	The value is an integer ranging from 50 to 500.

Views

View for online user synchronization from an Agile Controller server

Default Level

2: Configuration level

Usage Guidelines

By default, the rate for sending query packets is 200 times per second.

After online user synchronization from a Agile Controller server is enabled using the enable command, the FW queries online users from the Agile Controller server based on source IP address when traffic that has no matching user entry passes through the FW or users age. If there are a large number of IP addresses to be queried, the Agile Controller server cannot process packets properly, and the FW performance is compromised. In this case, you can run the user-manage server-sync tsm command to set the rate for sending query packets.

If the rate is too low, the login speed of users is low, affecting user experience. The default rate is recommended for general use.

Example

# Set the rate for sending query packets to 100 times per second.

<sysname> system-view
[sysname] user-manage server-sync tsm
[sysname-srv-sync-tsm] sync-rate 100