v-gateway web-access enable

Function

The v-gateway web-access enable command enables the web access mode of the virtual gateway.

The undo v-gateway web-access enable command disables the web access mode of the virtual gateway.

By default, web access is enabled on the virtual gateway.

Format

v-gateway web-access enable

undo v-gateway web-access enable

Views

System view

Default Level

2: Configuration level

Usage Guidelines

This command is supported since V600R007C20SPC500.

After the web access mode of the virtual gateway is disabled, all web pages of the virtual gateway, including the login page of the virtual gateway, cannot be accessed. In this case, you can log in to the virtual gateway only through the client software.

The web access mode of the virtual gateway takes effect globally, regardless of virtual systems or virtual gateways.

Example

# Disable the web access mode of the virtual gateway.

<sysname> system-view
[sysname] undo v-gateway web-access enable
Warning: This operation will cause a failure to use a web browser to access the virtual gateway. Are you sure you want to continue? [Y/N]