apply isis

Function

The apply isis command sets the level of the routes imported to IS-IS.

The undo apply isis command cancels the configuration.

By default, the level of the routes imported to IS-IS is not set.

apply isis { level-1 | level-1-2 | level-2 }

undo apply isis

Parameter	Description	Value
level-1	Indicates IS-IS Level-1 routes.	-
level-1-2	Indicates IS-IS Level-1 and Level-2 routes.	-
level-2	Indicates IS-IS Level-2 routes.	-

Route-policy view

2: Configuration level

Usage Scenario

When importing routes to IS-IS, you can use the apply isis command to set the level of the routes imported to IS-IS.

Prerequisites

The apply isis command can be used only after the route-policy command is used.

Configuration Impact

After a route matches a route-policy, you can set the level of the route imported to IS-IS.

# Set the level of the routes imported to IS-IS.

<sysname> system-view

[sysname] route-policy policy permit node 10

[sysname-route-policy] apply isis level-1